Materials and Pricing
Choose a material and 3D Print your model
MJP HD White
3.25 per cm3
Resolution 32 Microns
Printer Type: MultiJet Printing (MJP)
Material: VisiJet M2R-WT / UV Cured Plastic
Finish: Smooth dry finish
Models and parts requiring high details, demonstration, inventions and prototypes. Great for miniatures, figurines, train parts that can be finished and painted.
This is the new formulated HD White (VisiJet M2R-WT) that is UV cured. It’s a rigid plastic with sharp edges, great for prototyping and concept design.
The MJP 3D printing process uses a type of wax for support during the printing process. The support material is removed before shipping.
- Primary material
- Support material
- Post processing
- Startup fee ($5)
A good 3D Print starts with a well-designed Model that is optimized for specific 3D Printing Materials. We’ve created these design guides to identify some of the minimum features required for a specific material.
Maximum Size: X:293 × Y:210 × Z:144 mm (11.5 x 8.2 x 5.6 in)
Bounding Box is the maximum size of the build chamber and your model has to fit inside these dimensions.
Minimum Supported Wall Thickness
Recommended: 0.3 mm
A supported wall is one that is connected to other walls on two or more sides. A supported wall smaller than 0.3 mm may warp during the post cleaning process.
Minimum Drain Hole Size
Recommended: 3 mm
Drain holes are recommended for the wax to escape in models that are fully enclosed (spheres, cylinders, figurines, etc.). Without drain holes of at least 3 mm in diameter, the part may trap the wax and add weight or have an undesired look to your model.
Recommended: 0.07 mm
The minimum clearance is the recommend distance needed between two moving parts of a model (gears, joints, moving parts, etc.). A clearance of less than 0.07 mm may cause the parts to fuse.